TREE-MOUNT WINCH ANCHORING SYSTEM WITH RUBBER PADS

DESCRIPTION

This anchoring system makes it possible to securely mount the winch to a tree or pole, allowing you to work at a more comfortable height and thus facilitate prolonged use from a fixed point. It is the basis of different combinations of accessories (see figures above). It has four rubber pads that prevent it from slipping on the pole and protect the bark of trees.

Included is a 3-metre strap and a ratchet system with key to securely anchor it.

For all winches.

SPECIFICATIONS

Will fit trees or poles from 30 to 91 cm in diameter.

Note: It can't be used alone; it must be combined with other accessories. Different combinations of accessories can be done with the PCA-1263 depending on the application and the environment (see figures above).

For instance, when paired with certain accessories, it will permit horizontal pulling. In such case, the winch will face the load and the rope will be in a direct line towards the winch.
See Fig. 3, 4, 5

Whereas when combined with other accessories it will be used for vertical pulling. In these cases, the winch will face the anchor point and the rope will come from the top to the winch.
See Fig. 6, 7

Material: Steel with high resistance paint
Weight: 7.2 kg
Dimensions: 37 cm x 26 cm x 22 cm

Please see our video content explaining and showing all the products below.

VIDEO CONTENT Since the video mentioned above is 13-minute long, we thought we would put the markers below to allow you to simply select to your product(s) of interest at their designated times. Simply select the time and it will bring you to the correct time spot of the video
PRODUCTS	STARTS AT
Anchoring systems for trees and poles	1 min 10 sec
PCA-1260 - Polyester sling	1 min 15 sec
PCA-1263 - Tree-mount winch anchoring system with rubber pads	1 min 37 sec
PCA-1268 - Winch support plate	3 min 31 sec
PCA-1264 (PCA-2264) - Vertical pull winch supports. Products modified since.	4 min 26 sec
PCA-1269 - Tree-mount winch anchoring system	6 min 50 sec
Anchoring systems for vehicles	8 min
PCA-1267/PCA-1501 - Hitch square tubing	8 min 13 sec
PCA-1266 - Heck Pack anchoring system with adaptor for 50 mm tow ball	8 min 30 sec
PCA-1268 - Winch support plate	8 min 45 sec
PCA-1264 (PCA-2264) - Vertical pull winch supports. Products modified since.	9 min 35 sec
PCA-1261 - Hitch plate for towing balls	11 min 34 sec